Knox Boxes

Print
Press Enter to show all options, press Tab go to next option

Knox_banner

  


Order a Knox Box

 

Instructions on how to order a Knox Box

KnoxBox

 

Seconds count in a life-threatening medical emergency or a fire. Yet many times, firefighters responding to an emergency find access blocked by locked entrance doors or gates. To help reduce delays in providing emergency assistance, the Franklin Fire Department has adopted use of the Knox Rapid Entry System.

 

 

Knox Rapid Entry System

Used by Fire Departments throughout the country, the primary component of the Knox Rapid Entry System is a key box unique to the jurisdiction in which it is located. Only the Fire Department will have access to boxes used in Franklin. Use of the system may improve emergency service to building owners and occupants, and can result in savings by eliminating property damage due to emergency forced entry. Use of the Knox Rapid Entry System is authorized by Chapter 7-227 of the Franklin Municipal Code. The Code specifies that the Fire Department requires a key box containing access keys be installed at the entrance to structures or areas where access for the purpose of life safety or fire fighting is restricted

 

How does it work?

A building owner installs a Knox key box on the exterior of the building at the main entrance point. The box will be equipped with a lock which can be opened only with a key that is issued solely to the Franklin Fire Department. Emergency vehicles are equipped with one key that is held in a special security device. At the time the Knox box is installed, the building owner arranges for the Fire Department to visit their facility, inspect the access keys that will be placed inside the Knox box, and then lock the access keys inside the Knox box using the special security key. The building owner is not able to obtain a key to open the Knox box. If keys must be added or removed, an appointment must be made for the Department to visit the facility. When emergency access is required, a firefighter removes the key from the special security device in their emergency vehicle and opens the Knox box to remove the access keys. After use, the Fire Department member places the access keys in the key box, and returns the special Knox box key to the security device in the vehicle.

 

Obtaining and installing the Knox Rapid Entry System

  • Knox key box entry systems are available for both commercial and residential use.

When an occupancy chooses or is directed to install a key box, it is purchased from www.knoxbox.com. The building owner is responsible for installation of the Knox key box. It must be mounted on the building exterior at a height of between six to seven feet and within three feet of the Fire Department direct access point (front door, main gate). Surface recessed Knox key box installations will be permitted, provided that the Knox box is clearly marked. Various sizes of the Knox box are available depending on the number of keys that need to be contained in the box. Once the Knox key box is installed, the building owner contacts the Franklin Fire Department Fire Prevention Division during regular office hours at 615-791-3270 to finalize the installation. The Fire Prevention Division will arrange for the building owner to be contacted and visited by members of the local fire station to inspect the Knox box and install the access keys.

 

Questions

If you have questions about requirements for the Knox Rapid Entry System, or need to schedule an appointment to finalize installation of your Knox key box, call the Franklin Fire Department Fire Prevention Division during regular business hours at (615) 791-3270 or email fireprevention@franklintn.gov.